When client breached the output buffer soft limit but then went idle,
we didn't disconnect on soft limit timeout, now we do.
Note this also resolves some sporadic test failures in due to Linux
buffering data which caused tests to fail if during the test we went
back under the soft COB limit.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
(cherry picked from commit 152fce5e2c)
An integer overflow bug in Redis version 6.0 or newer could be exploited using
the STRALGO LCS command to corrupt the heap and potentially result with remote
code execution.
(cherry picked from commit f0c5f920d0)
An integer overflow bug in Redis 6.2 could be exploited to corrupt the heap and
potentially result with remote code execution.
The vulnerability involves changing the default set-max-intset-entries
configuration value, creating a large set key that consists of integer values
and using the COPY command to duplicate it.
The integer overflow bug exists in all versions of Redis starting with 2.6,
where it could result with a corrupted RDB or DUMP payload, but not exploited
through COPY (which did not exist before 6.2).
(cherry picked from commit 29900d4e6b)
missing zfree(data) in redis-benchmark.
And also correct the wrong size in lrange.
the text mentioned 500, but size was 450, changed to 500
(cherry picked from commit 1eff8564c7)
When redis-cli was used with both -c (cluster) and -s (unix socket),
it would have kept trying to use that unix socket, even if it got
redirected by the cluster (resulting in an infinite loop).
(cherry picked from commit 416f277339)
- Immediately exit on errors that are not related to topology updates.
- Deprecates the `-e` option ( retro compatible ) and warns that we now
exit immediately on errors that are not related to topology updates.
- Fixed wrongfully failing on config fetch error (warning only). This only affects RE.
Bottom line:
- MOVED and ASK errors will not show any warning (unlike the throttled error with `-e` before).
- CLUSTERDOWN still prints an error unconditionally and sleeps for 1 second.
- other errors are fatal.
(cherry picked from commit ef6f902372)
Use an invalid IP address to trigger CONFIG SET bind failure, instead of DNS which is not guaranteed to always fail.
(cherry picked from commit 2b22fffc78)
This solves an issue reported in #8712 in which a replica would bypass
the client write pause check and cause an assertion due to executing a
write command during failover.
The fact is that we don't expect replicas to execute any command other
than maybe REPLCONF and PING, etc. but matching against the ADMIN
command flag is insufficient, so instead i just block keyspace access
for now.
(cherry picked from commit 46f4ebbe84)
This prevents a case where NTP moves the system clock
forward resulting in a false detection of a busy script.
Signed-off-by: zyxwvu Shi <i@shiyc.cn>
(cherry picked from commit f61c37cec9)
Modules event subscribers may get wrong things in notifyKeyspaceEvent callback,
such as wrong number of keys, or be able to lookup this key.
This commit changes the order to be like the one in evict.c.
Cleanup:
Since we know the key exists (it expires now), db*Delete is sure to return 1,
so there's no need to check it's output (misleading).
(cherry picked from commit 63acfe4b00)
This scene is hard to happen. When first attempt some keys expired,
only kv position is updated not ov. Then socket err happens, second
attempt is taken. This time kv items may be mismatching with ov items.
(cherry picked from commit 080d4579db)
Adding a new type mask for key space notification, REDISMODULE_NOTIFY_MODULE, to enable unique notifications from commands on REDISMODULE_KEYTYPE_MODULE type keys (which is currently unsupported).
Modules can subscribe to a module key keyspace notification by RM_SubscribeToKeyspaceEvents,
and clients by notify-keyspace-events of redis.conf or via the CONFIG SET, with the characters 'd' or 'A'
(REDISMODULE_NOTIFY_MODULE type mask is part of the '**A**ll' notation for key space notifications).
Refactor: move some pubsub test infra from pubsub.tcl to util.tcl to be re-used by other tests.
Before this commit using RM_Call without "!" could cause the master
to lazy-expire a key (delete it) but without replicating to replicas.
This could cause the replica's memory usage to gradually grow and
could also cause consistency issues if the master and replica have
a clock diff.
This bug was introduced in #8617
Added a test which demonstrates that scenario.
In the initial release of Redis 6.2 setting a user to only allow pubsub access to
a specific channel, and doing ACL SAVE, resulted in an assertion when
ACL LOAD was used. This was later changed by #8723 (not yet released),
but still not properly resolved (now it errors instead of crash).
The problem is that the server that generates an ACL file, doesn't know what
would be the setting of the acl-pubsub-default config in the server that will load it.
so ACL SAVE needs to always start with resetchannels directive.
This should still be compatible with old acl files (from redis 6.0), and ones from earlier
versions of 6.2 that didn't mess with channels.
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The tail size of c->reply is 16kb, but in the test only publish a
few chars each time, due to a change in #8699, the obuf limit
is now checked a new memory allocation is made, so this test
would have sometimes failed to trigger a soft limit disconnection
in time.
The solution is to write bigger payloads to the output buffer, but
still limit their rate (not more than 100k/s).
When replica never successfully connect to master, server.repl_down_since
will be initialized to 0, therefore, the info master_link_down_since_seconds
was showing the current unix timestamp, which does not make much sense.
This commit fixes the issue by showing master_link_down_since_seconds to -1.
means the replica never connect to master before.
This commit also resets this variable back to 0 when a replica is turned into
a master, so that it'll behave the same if the master is later turned into a
replica again.
The implication of this change is that if some app is checking if the value is > 60
do something, like conclude the replica is stale, this could case harm (changing
a big positive number with a small one).
In github actions CI with valgrind, i saw that even the fast replica
(one that wasn't paused), didn't get to complete the replication fast
enough, and ended up getting disconnected by timeout.
Additionally, due to a typo in uname, we didn't get to actually run the
CPU efficiency part of the test.
1. the `dump_logs` option would have printed only logs of servers that were
spawn before the test proc started, and not ones that the test proc
started inside it.
2. when a server proc catches an exception it should normally forward the
exception upwards, specifically when it's an assertion that should be
caught by a test proc above. however, in `durable` mode, we caught all
exceptions printed them to stdout and let the code continue,
this was wrong to do for assertions, which should have still been
propagated to the test function.
3. don't bother to search for crash log to print if we printed the the
entire log anyway
4. if no crash log was found, no need to print anything (i.e. the fact it
wasn't found)
5. rename warnings_from_file to crashlog_from_file
Starting redis 6.0 (part of the TLS feature), diskless master uses pipe from the fork
child so that the parent is the one sending data to the replicas.
This mechanism has an issue in which a hung replica will cause the master to wait
for it to read the data sent to it forever, thus preventing the fork child from terminating
and preventing the creations of any other forks.
This PR adds a timeout mechanism, much like the ACK-based timeout,
we disconnect replicas that aren't reading the RDB file fast enough.
* Modules API docs: Link API function names to their definitions
Occurrences of API functions are linked to their definition.
A function index with links to all functions is added on the bottom
of the page.
Comment blocks in module.c starting with a markdown h2 heading are
used as sections. A table of contents is generated from these
headings.
The functions names are changed from h2 to h3, since they are now
rendered as sub-headings within each section.
Existing sections in module.c are used with some minor changes.
Some documentation text is added or sligtly modified.
The markdown renderer will add IDs which may clash with our
generated IDs. By prefixing section IDs with "section-" we make
them different.
Replace double dashes with a unicode long ndash
In a code example, using RedisModule_FreeString instead of
RedisModule_Free makes it behave correctly regardless of whether
automatic memory is used or not.
server.client_pause_end_time is uninitialized, or actually 0, at startup,
which means this method would think the timeout was reached
and go look for paused clients.
This causes no harm since unpauseClients will not find any paused clients.
The code used to decide on the next time to wake on a timer with
microsecond accuracy, but when deciding to go to sleep it used
milliseconds accuracy (with truncation), this means that it would wake
up too early, see that there's no timer to process, and go to sleep
again for 0ms again and again until the right microsecond arrived.
i.e. a timer for 100ms, would sleep for 99ms, but then do a busy loop
through the kernel in the last millisecond, triggering many calls to
beforeSleep.
The fix is to change all the logic in ae.c to work with microseconds,
which is good since most of the ae backends support micro (or even nano)
seconds. however the epoll backend, doesn't support micro, so to avoid
this problem it needs to round upwards, rather than truncate.
Issue created by the monotonic timer PR #7644 (redis 6.2)
Before that, all the timers in ae.c were in milliseconds (using
mstime), so when it requested the backend to sleep till the next timer
event, it would have worked ok.
Disable replica migration to avoid a race condition where the
migrated-from node turns into a replica.
Long term, this test should probably be improved to handle multiple
slots and accept such auto migrations but this is a quick fix to
stabilize the CI without completely dropping this test.
Wang Yuan