If we only has one node in cluster or before 8fdc857, we don't know myself ip, so we should use config.hostip for myself.
However, we should use the IP from the command response to update node->ip if it exists and is different from config.hostip
otherwise, when there's more than one node in cluster, if we use -h with virtual IP or DNS, benchmark doesn't show node real ip and port of myself even though it could get right IP and port by CLUSTER NODES command.
Fix wrong server dirty increment in
* spopWithCountCommand
* hsetCommand
* ltrimCommand
* pfaddCommand
Some didn't increment the amount of fields (just one per command).
Others had excessive increments.
Additionally the older defrag tests are using an obsolete way to check
if the defragger is suuported (the error no longer contains "DISABLED").
this doesn't usually makes a difference since these tests are completely
skipped if the allocator is not jemalloc, but that would fail if the
allocator is a jemalloc that doesn't support defrag.
Exposes the main thread CPU info via info modules ( linux specific only )
(used_cpu_sys_main_thread and used_cpu_user_main_thread). This is important for:
- distinguish between main thread and io-threads cpu time total cpu time consumed ( check
what is the first bottleneck on the used config )
- distinguish between main thread and modules threads total cpu time consumed
Apart from it, this commit also exposes the server_time_usec within the Server section so that we can
properly differentiate consecutive collection and calculate for example the CPU% and or / cpu time vs
wall time, etc...
* Allow runtest-moduleapi use a different 'make', for systems where GNU Make is 'gmake'.
* Fix issue with builds on Solaris re-building everything from scratch due to CFLAGS/LDFLAGS not stored.
* Fix compile failure on Solaris due to atomicvar and a bunch of warnings.
* Fix garbled log timestamps on Solaris.
When a replica uses the diskless-load swapdb approach, it backs up the old database,
then attempts to load a new one, and in case of failure, it restores the backup.
this means that modules with global out of keyspace data, must have an option to
subscribe to events and backup/restore/discard their global data too.
Add a new set of defrag functions that take a defrag context and allow
defragmenting memory blocks and RedisModuleStrings.
Modules can register a defrag callback which will be invoked when the
defrag process handles globals.
Modules with custom data types can also register a datatype-specific
defrag callback which is invoked for keys that require defragmentation.
The callback and associated functions support both one-step and
multi-step options, depending on the complexity of the key as exposed by
the free_effort callback.
The pid of the benchmark process is used to randomize the random number generator's
seed. This ensures that when multiple benchmark processes are started at the same time
to generate load on a server, they use different seeds. This will ensure randomness in
the keys generated by different benchmark processes.
Add commands to query geospatial data with bounding box.
Two new commands that replace the existing 4 GEORADIUS* commands.
GEOSEARCH key [FROMMEMBER member] [FROMLOC long lat] [BYRADIUS radius
unit] [BYBOX width height unit] [WITHCORD] [WITHDIST] [WITHASH] [COUNT
count] [ASC|DESC]
GEOSEARCHSTORE dest_key src_key [FROMMEMBER member] [FROMLOC long lat]
[BYRADIUS radius unit] [BYBOX width height unit] [WITHCORD] [WITHDIST]
[WITHASH] [COUNT count] [ASC|DESC] [STOREDIST]
- Add two types of CIRCULAR_TYPE and RECTANGLE_TYPE to achieve different searches
- Judge whether the point is within the rectangle, refer to:
geohashGetDistanceIfInRectangle
This adds a new `tls-client-cert-file` and `tls-client-key-file`
configuration directives which make it possible to use different
certificates for the TLS-server and TLS-client functions of Redis.
This is an optional directive. If it is not specified the `tls-cert-file`
and `tls-key-file` directives are used for TLS client functions as well.
Also, `utils/gen-test-certs.sh` now creates additional server-only and client-only certs and will skip intensive operations if target files already exist.
This adds a copy callback for module data types, in order to make
modules compatible with the new COPY command.
The callback is optional and COPY will fail for keys with data types
that do not implement it.
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
c4fdf09c0 added a test that now fails with valgrind
it fails for two resons:
1) the test samples the used memory and then limits the maxmemory to
that value, but it turns out this is not atomic and on slow machines
the background cron process that clean out old query buffers reduces
the memory so that the setting doesn't cause eviction.
2) the dbsize was tested late, after reading some invalidation messages
by that time more and more keys got evicted, partially draining the
db. this is not the focus of this fix (still a known limitation)
Makes spt_init more careful with assumptions about what memory regions
may be overwritten. It will now only consider a contiguous block of argv
and envp elements and mind any gaps.
when the same consumer re-claim an entry that it already has, there's
no need to remove-and-insert if it's the same rax.
we do need to update the idle time though.
this commit only improves efficiency (doesn't change behavior).
* Add CLIENT INFO subcommand.
The output is identical to CLIENT LIST but provides a single line for
the current client only.
* Add CLIENT LIST ID [id...].
Co-authored-by: Itamar Haber <itamar@redislabs.com>
First, if the ziplist header is surely inside the ziplist, do fast path
decoding rather than the careful one.
In that case, streamline the encoding if-else chain to be executed only
once, and the encoding validity tested at the end.
encourage inlining
likely / unlikely hints for speculative execution
Assertion used _exit(1) to tell the compiler that the code after them is
not reachable and get rid of warnings.
But in some cases assertions are placed inside tight loops, and any
piece of code in them can slow down execution (code cache and other
reasons), instead using either abort() or better yet, unreachable
builtin.
If RESTORE passes successfully with full sanitization, we can't affort
to crash later on assertion due to duplicate records in a hash when
converting it form ziplist to dict.
This means that when doing full sanitization, we must make sure there
are no duplicate records in any of the collections.
when using --baseport to run two tests suite in parallel (different
folders), we need to also make sure the port used by the testsuite to
communicate with it's workers is unique. otherwise the attept to find a
free port connects to the other test suite and messes it.
maybe one day we need to attempt to bind, instead of connect when tring
to find a free port.
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
- improve stream rdb encoding test to include more types of stream metadata
- add test to cover various ziplist encoding entries (although it does
look like the stress test above it is able to find some too
- add another test for ziplist encoding for hash with full sanitization
- add similar ziplist encoding tests for list
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
When client tracking is enabled signalModifiedKey can increase memory usage,
this can cause the loop in performEvictions to keep running since it was measuring
the memory usage impact of signalModifiedKey.
The section that measures the memory impact of the eviction should be just on dbDelete,
excluding keyspace notification, client tracking, and propagation to AOF and replicas.
This resolves part of the problem described in #8069
p.s. fix took 1 minute, test took about 3 hours to write.
One way this was happening is when a module issued an RM_Call which would inject MULTI.
If the module command that does that was itself issued by something else that already did
added MULTI (e.g. another module, or a Lua script), it would have caused nested MULTI.
In fact the MULTI state in the client or the MULTI_EMITTED flag in the context isn't
the right indication that we need to propagate MULTI or not, because on a nested calls
(possibly a module action called by a keyspace event of another module action), these
flags aren't retained / reflected.
instead there's now a global propagate_in_transaction flag for that.
in addition to that, we now have a global in_eval and in_exec flags, to serve the flags
of RM_GetContextFlags, since their dependence on the current client is wrong for the same
reasons mentioned above.
As we know, redis may reject user's requests or evict some keys if
used memory is over maxmemory. Dictionaries expanding may make
things worse, some big dictionaries, such as main db and expires dict,
may eat huge memory at once for allocating a new big hash table and be
far more than maxmemory after expanding.
There are related issues: #4213#4583
More details, when expand dict in redis, we will allocate a new big
ht[1] that generally is double of ht[0], The size of ht[1] will be
very big if ht[0] already is big. For db dict, if we have more than
64 million keys, we need to cost 1GB for ht[1] when dict expands.
If the sum of used memory and new hash table of dict needed exceeds
maxmemory, we shouldn't allow the dict to expand. Because, if we
enable keys eviction, we still couldn't add much more keys after
eviction and rehashing, what's worse, redis will keep less keys when
redis only remains a little memory for storing new hash table instead
of users' data. Moreover users can't write data in redis if disable
keys eviction.
What this commit changed ?
Add a new member function expandAllowed for dict type, it provide a way
for caller to allow expand or not. We expose two parameters for this
function: more memory needed for expanding and dict current load factor,
users can implement a function to make a decision by them.
For main db dict and expires dict type, these dictionaries may be very
big and cost huge memory for expanding, so we implement a judgement
function: we can stop dict to expand provisionally if used memory will
be over maxmemory after dict expands, but to guarantee the performance
of redis, we still allow dict to expand if dict load factor exceeds the
safe load factor.
Add test cases to verify we don't allow main db to expand when left
memory is not enough, so that avoid keys eviction.
Other changes:
For new hash table size when expand. Before this commit, the size is
that double used of dict and later _dictNextPower. Actually we aim to
control a dict load factor between 0.5 and 1.0. Now we replace *2 with
+1, since the first check is that used >= size, the outcome of before
will usually be the same as _dictNextPower(used+1). The only case where
it'll differ is when dict_can_resize is false during fork, so that later
the _dictNextPower(used*2) will cause the dict to jump to *4 (i.e.
_dictNextPower(1025*2) will return 4096).
Fix rehash test cases due to changing algorithm of new hash table size
when expand.
Qu Chen