diff --git a/msvs/setups/chocolatey/Redis.nuspec b/msvs/setups/chocolatey/Redis.nuspec new file mode 100644 index 00000000..eaf20ba9 --- /dev/null +++ b/msvs/setups/chocolatey/Redis.nuspec @@ -0,0 +1,26 @@ + + + + redis-64 + redis-64 + 2.8.4 + Jonathan Pickett + Microsoft Open Technologies, Inc. + Redis is a very popular open-source, networked, in-memory, key-value data store known for high performance, flexibility, a rich set of data structures, and a simple straightforward API. + A production-ready Windows port of Redis, including 64-bit support, an installer for Windows Azure, Chocolatey support, and much more. + https://msopentech.com/opentech-projects/redis/ + Redis nosql cache + Copyright Microsoft Open Technologies, Inc. + https://github.com/MSOpenTech/redis/blob/2.8.4_msopen/license.txt + false + http://redis.io/images/redis.png + + + + + + + + + + diff --git a/msvs/setups/documentation/Redis Release Notes.docx b/msvs/setups/documentation/Redis Release Notes.docx new file mode 100644 index 00000000..c3c2b0e5 Binary files /dev/null and b/msvs/setups/documentation/Redis Release Notes.docx differ diff --git a/msvs/setups/documentation/redis.windows.conf b/msvs/setups/documentation/redis.windows.conf new file mode 100644 index 00000000..dd767909 --- /dev/null +++ b/msvs/setups/documentation/redis.windows.conf @@ -0,0 +1,631 @@ +# Redis configuration file example + +# Note on units: when memory size is needed, it is possible to specify +# it in the usual form of 1k 5GB 4M and so forth: +# +# 1k => 1000 bytes +# 1kb => 1024 bytes +# 1m => 1000000 bytes +# 1mb => 1024*1024 bytes +# 1g => 1000000000 bytes +# 1gb => 1024*1024*1024 bytes +# +# units are case insensitive so 1GB 1Gb 1gB are all the same. + +# By default Redis does not run as a daemon. Use 'yes' if you need it. +# Note that Redis will write a pid file in /var/run/redis.pid when daemonized. +daemonize no + +# When running daemonized, Redis writes a pid file in /var/run/redis.pid by +# default. You can specify a custom pid file location here. +pidfile /var/run/redis.pid + +# Accept connections on the specified port, default is 6379. +# If port 0 is specified Redis will not listen on a TCP socket. +port 6379 + +# If you want you can bind a single interface, if the bind option is not +# specified all the interfaces will listen for incoming connections. +# +# bind 127.0.0.1 + +# Specify the path for the unix socket that will be used to listen for +# incoming connections. There is no default, so Redis will not listen +# on a unix socket when not specified. +# +# unixsocket /tmp/redis.sock +# unixsocketperm 755 + +# Close the connection after a client is idle for N seconds (0 to disable) +timeout 0 + +# TCP keepalive. +# +# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence +# of communication. This is useful for two reasons: +# +# 1) Detect dead peers. +# 2) Take the connection alive from the point of view of network +# equipment in the middle. +# +# On Linux, the specified value (in seconds) is the period used to send ACKs. +# Note that to close the connection the double of the time is needed. +# On other kernels the period depends on the kernel configuration. +# +# A reasonable value for this option is 60 seconds. +tcp-keepalive 0 + +# Specify the server verbosity level. +# This can be one of: +# debug (a lot of information, useful for development/testing) +# verbose (many rarely useful info, but not a mess like the debug level) +# notice (moderately verbose, what you want in production probably) +# warning (only very important / critical messages are logged) +loglevel notice + +# Specify the log file name. Also 'stdout' can be used to force +# Redis to log on the standard output. Note that if you use standard +# output for logging but daemonize, logs will be sent to /dev/null +logfile stdout + +# To enable logging to the system logger, just set 'syslog-enabled' to yes, +# and optionally update the other syslog parameters to suit your needs. +# syslog-enabled no + +# Specify the syslog identity. +# syslog-ident redis + +# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. +# syslog-facility local0 + +# Set the number of databases. The default database is DB 0, you can select +# a different one on a per-connection basis using SELECT where +# dbid is a number between 0 and 'databases'-1 +databases 16 + +################################ SNAPSHOTTING ################################# +# +# Save the DB on disk: +# +# save +# +# Will save the DB if both the given number of seconds and the given +# number of write operations against the DB occurred. +# +# In the example below the behaviour will be to save: +# after 900 sec (15 min) if at least 1 key changed +# after 300 sec (5 min) if at least 10 keys changed +# after 60 sec if at least 10000 keys changed +# +# Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" + +save 900 1 +save 300 10 +save 60 10000 + +# By default Redis will stop accepting writes if RDB snapshots are enabled +# (at least one save point) and the latest background save failed. +# This will make the user aware (in an hard way) that data is not persisting +# on disk properly, otherwise chances are that no one will notice and some +# distater will happen. +# +# If the background saving process will start working again Redis will +# automatically allow writes again. +# +# However if you have setup your proper monitoring of the Redis server +# and persistence, you may want to disable this feature so that Redis will +# continue to work as usually even if there are problems with disk, +# permissions, and so forth. +stop-writes-on-bgsave-error yes + +# Compress string objects using LZF when dump .rdb databases? +# For default that's set to 'yes' as it's almost always a win. +# If you want to save some CPU in the saving child set it to 'no' but +# the dataset will likely be bigger if you have compressible values or keys. +rdbcompression yes + +# Since version 5 of RDB a CRC64 checksum is placed at the end of the file. +# This makes the format more resistant to corruption but there is a performance +# hit to pay (around 10%) when saving and loading RDB files, so you can disable it +# for maximum performances. +# +# RDB files created with checksum disabled have a checksum of zero that will +# tell the loading code to skip the check. +rdbchecksum yes + +# The filename where to dump the DB +dbfilename dump.rdb + +# The working directory. +# +# The DB will be written inside this directory, with the filename specified +# above using the 'dbfilename' configuration directive. +# +# The Append Only File will also be created inside this directory. +# +# Note that you must specify a directory here, not a file name. +dir ./ + +################################# REPLICATION ################################# + +# Master-Slave replication. Use slaveof to make a Redis instance a copy of +# another Redis server. Note that the configuration is local to the slave +# so for example it is possible to configure the slave to save the DB with a +# different interval, or to listen to another port, and so on. +# +# slaveof + +# If the master is password protected (using the "requirepass" configuration +# directive below) it is possible to tell the slave to authenticate before +# starting the replication synchronization process, otherwise the master will +# refuse the slave request. +# +# masterauth + +# When a slave loses its connection with the master, or when the replication +# is still in progress, the slave can act in two different ways: +# +# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will +# still reply to client requests, possibly with out of date data, or the +# data set may just be empty if this is the first synchronization. +# +# 2) if slave-serve-stale-data is set to 'no' the slave will reply with +# an error "SYNC with master in progress" to all the kind of commands +# but to INFO and SLAVEOF. +# +slave-serve-stale-data yes + +# You can configure a slave instance to accept writes or not. Writing against +# a slave instance may be useful to store some ephemeral data (because data +# written on a slave will be easily deleted after resync with the master) but +# may also cause problems if clients are writing to it because of a +# misconfiguration. +# +# Since Redis 2.6 by default slaves are read-only. +# +# Note: read only slaves are not designed to be exposed to untrusted clients +# on the internet. It's just a protection layer against misuse of the instance. +# Still a read only slave exports by default all the administrative commands +# such as CONFIG, DEBUG, and so forth. To a limited extend you can improve +# security of read only slaves using 'rename-command' to shadow all the +# administrative / dangerous commands. +slave-read-only yes + +# Slaves send PINGs to server in a predefined interval. It's possible to change +# this interval with the repl_ping_slave_period option. The default value is 10 +# seconds. +# +# repl-ping-slave-period 10 + +# The following option sets a timeout for both Bulk transfer I/O timeout and +# master data or ping response timeout. The default value is 60 seconds. +# +# It is important to make sure that this value is greater than the value +# specified for repl-ping-slave-period otherwise a timeout will be detected +# every time there is low traffic between the master and the slave. +# +# repl-timeout 60 + +# Disable TCP_NODELAY on the slave socket after SYNC? +# +# If you select "yes" Redis will use a smaller number of TCP packets and +# less bandwidth to send data to slaves. But this can add a delay for +# the data to appear on the slave side, up to 40 milliseconds with +# Linux kernels using a default configuration. +# +# If you select "no" the delay for data to appear on the slave side will +# be reduced but more bandwidth will be used for replication. +# +# By default we optimize for low latency, but in very high traffic conditions +# or when the master and slaves are many hops away, turning this to "yes" may +# be a good idea. +repl-disable-tcp-nodelay no + +# The slave priority is an integer number published by Redis in the INFO output. +# It is used by Redis Sentinel in order to select a slave to promote into a +# master if the master is no longer working correctly. +# +# A slave with a low priority number is considered better for promotion, so +# for instance if there are three slaves with priority 10, 100, 25 Sentinel will +# pick the one wtih priority 10, that is the lowest. +# +# However a special priority of 0 marks the slave as not able to perform the +# role of master, so a slave with priority of 0 will never be selected by +# Redis Sentinel for promotion. +# +# By default the priority is 100. +slave-priority 100 + +################################## SECURITY ################################### + +# Require clients to issue AUTH before processing any other +# commands. This might be useful in environments in which you do not trust +# others with access to the host running redis-server. +# +# This should stay commented out for backward compatibility and because most +# people do not need auth (e.g. they run their own servers). +# +# Warning: since Redis is pretty fast an outside user can try up to +# 150k passwords per second against a good box. This means that you should +# use a very strong password otherwise it will be very easy to break. +# +# requirepass foobared + +# Command renaming. +# +# It is possible to change the name of dangerous commands in a shared +# environment. For instance the CONFIG command may be renamed into something +# hard to guess so that it will still be available for internal-use tools +# but not available for general clients. +# +# Example: +# +# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 +# +# It is also possible to completely kill a command by renaming it into +# an empty string: +# +# rename-command CONFIG "" +# +# Please note that changing the name of commands that are logged into the +# AOF file or transmitted to slaves may cause problems. + +################################### LIMITS #################################### + +# Set the max number of connected clients at the same time. By default +# this limit is set to 10000 clients, however if the Redis server is not +# able to configure the process file limit to allow for the specified limit +# the max number of allowed clients is set to the current file limit +# minus 32 (as Redis reserves a few file descriptors for internal uses). +# +# Once the limit is reached Redis will close all the new connections sending +# an error 'max number of clients reached'. +# +# maxclients 10000 + +# The Linux version of Redis relies on the system call fork() to perform +# point-in-time snapshots of the heap. In addition to the AOF and RDB backup +# mechanism, the master-slave synchronization and clustering features are +# dependent on this behavior of fork(). In order for the Windows version to +# perform like the Linux version we had to simulate this aspect of fork(). +# Doing so meant moving the Redis heap into a memory mapped file that can +# be shared with a child process. +# +# *** There must be disk space available for this file in order for Redis +# to launch. *** +# +# The maxheap flag controls the maximum size of this memory mapped file, +# as well as the total usable space for the Redis heap. Running Redis +# without either maxheap or maxmemory will result in a memory mapped file +# being created that is equal to the size of physical memory. During +# fork() operations the total page file commit will max out at around: +# +# (size of physical memory) + (2 * size of maxheap) +# +# For instance, on a machine with 8GB of physical RAM, the max page file +# commit with the default maxheap size will be (8)+(2*8) GB , or 24GB. The +# default page file sizing of Windows will allow for this without having +# to reconfigure the system. Larger heap sizes are possible, but the maximum +# page file size will have to be increased accordingly. +# +# The Redis heap must be larger than the value specified by the maxmemory +# flag, as the heap allocator has its own memory requirements and +# fragmentation of the heap is inevitable. If only the maxmemory flag is +# specified, maxheap will be set at 1.5*maxmemory. If the maxheap flag is +# specified along with maxmemory, the maxheap flag will be automatically +# increased if it is smaller than 1.5*maxmemory. +# +# maxheap + +# Don't use more memory than the specified amount of bytes. +# When the memory limit is reached Redis will try to remove keys +# accordingly to the eviction policy selected (see maxmemmory-policy). +# +# If Redis can't remove keys according to the policy, or if the policy is +# set to 'noeviction', Redis will start to reply with errors to commands +# that would use more memory, like SET, LPUSH, and so on, and will continue +# to reply to read-only commands like GET. +# +# This option is usually useful when using Redis as an LRU cache, or to set +# an hard memory limit for an instance (using the 'noeviction' policy). +# +# WARNING: If you have slaves attached to an instance with maxmemory on, +# the size of the output buffers needed to feed the slaves are subtracted +# from the used memory count, so that network problems / resyncs will +# not trigger a loop where keys are evicted, and in turn the output +# buffer of slaves is full with DELs of keys evicted triggering the deletion +# of more keys, and so forth until the database is completely emptied. +# +# In short... if you have slaves attached it is suggested that you set a lower +# limit for maxmemory so that there is some free RAM on the system for slave +# output buffers (but this is not needed if the policy is 'noeviction'). +# +# maxmemory + +# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory +# is reached. You can select among five behaviors: +# +# volatile-lru -> remove the key with an expire set using an LRU algorithm +# allkeys-lru -> remove any key accordingly to the LRU algorithm +# volatile-random -> remove a random key with an expire set +# allkeys-random -> remove a random key, any key +# volatile-ttl -> remove the key with the nearest expire time (minor TTL) +# noeviction -> don't expire at all, just return an error on write operations +# +# Note: with any of the above policies, Redis will return an error on write +# operations, when there are not suitable keys for eviction. +# +# At the date of writing this commands are: set setnx setex append +# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd +# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby +# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby +# getset mset msetnx exec sort +# +# The default is: +# +# maxmemory-policy volatile-lru + +# LRU and minimal TTL algorithms are not precise algorithms but approximated +# algorithms (in order to save memory), so you can select as well the sample +# size to check. For instance for default Redis will check three keys and +# pick the one that was used less recently, you can change the sample size +# using the following configuration directive. +# +# maxmemory-samples 3 + +############################## APPEND ONLY MODE ############################### + +# By default Redis asynchronously dumps the dataset on disk. This mode is +# good enough in many applications, but an issue with the Redis process or +# a power outage may result into a few minutes of writes lost (depending on +# the configured save points). +# +# The Append Only File is an alternative persistence mode that provides +# much better durability. For instance using the default data fsync policy +# (see later in the config file) Redis can lose just one second of writes in a +# dramatic event like a server power outage, or a single write if something +# wrong with the Redis process itself happens, but the operating system is +# still running correctly. +# +# AOF and RDB persistence can be enabled at the same time without problems. +# If the AOF is enabled on startup Redis will load the AOF, that is the file +# with the better durability guarantees. +# +# Please check http://redis.io/topics/persistence for more information. + +appendonly no + +# The name of the append only file (default: "appendonly.aof") +# appendfilename appendonly.aof + +# The fsync() call tells the Operating System to actually write data on disk +# instead to wait for more data in the output buffer. Some OS will really flush +# data on disk, some other OS will just try to do it ASAP. +# +# Redis supports three different modes: +# +# no: don't fsync, just let the OS flush the data when it wants. Faster. +# always: fsync after every write to the append only log . Slow, Safest. +# everysec: fsync only one time every second. Compromise. +# +# The default is "everysec", as that's usually the right compromise between +# speed and data safety. It's up to you to understand if you can relax this to +# "no" that will let the operating system flush the output buffer when +# it wants, for better performances (but if you can live with the idea of +# some data loss consider the default persistence mode that's snapshotting), +# or on the contrary, use "always" that's very slow but a bit safer than +# everysec. +# +# More details please check the following article: +# http://antirez.com/post/redis-persistence-demystified.html +# +# If unsure, use "everysec". + +# appendfsync always +appendfsync everysec +# appendfsync no + +# When the AOF fsync policy is set to always or everysec, and a background +# saving process (a background save or AOF log background rewriting) is +# performing a lot of I/O against the disk, in some Linux configurations +# Redis may block too long on the fsync() call. Note that there is no fix for +# this currently, as even performing fsync in a different thread will block +# our synchronous write(2) call. +# +# In order to mitigate this problem it's possible to use the following option +# that will prevent fsync() from being called in the main process while a +# BGSAVE or BGREWRITEAOF is in progress. +# +# This means that while another child is saving, the durability of Redis is +# the same as "appendfsync none". In practical terms, this means that it is +# possible to lose up to 30 seconds of log in the worst scenario (with the +# default Linux settings). +# +# If you have latency problems turn this to "yes". Otherwise leave it as +# "no" that is the safest pick from the point of view of durability. +no-appendfsync-on-rewrite no + +# Automatic rewrite of the append only file. +# Redis is able to automatically rewrite the log file implicitly calling +# BGREWRITEAOF when the AOF log size grows by the specified percentage. +# +# This is how it works: Redis remembers the size of the AOF file after the +# latest rewrite (if no rewrite has happened since the restart, the size of +# the AOF at startup is used). +# +# This base size is compared to the current size. If the current size is +# bigger than the specified percentage, the rewrite is triggered. Also +# you need to specify a minimal size for the AOF file to be rewritten, this +# is useful to avoid rewriting the AOF file even if the percentage increase +# is reached but it is still pretty small. +# +# Specify a percentage of zero in order to disable the automatic AOF +# rewrite feature. + +auto-aof-rewrite-percentage 100 +auto-aof-rewrite-min-size 64mb + +################################ LUA SCRIPTING ############################### + +# Max execution time of a Lua script in milliseconds. +# +# If the maximum execution time is reached Redis will log that a script is +# still in execution after the maximum allowed time and will start to +# reply to queries with an error. +# +# When a long running script exceed the maximum execution time only the +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be +# used to stop a script that did not yet called write commands. The second +# is the only way to shut down the server in the case a write commands was +# already issue by the script but the user don't want to wait for the natural +# termination of the script. +# +# Set it to 0 or a negative value for unlimited execution without warnings. +lua-time-limit 5000 + +################################## SLOW LOG ################################### + +# The Redis Slow Log is a system to log queries that exceeded a specified +# execution time. The execution time does not include the I/O operations +# like talking with the client, sending the reply and so forth, +# but just the time needed to actually execute the command (this is the only +# stage of command execution where the thread is blocked and can not serve +# other requests in the meantime). +# +# You can configure the slow log with two parameters: one tells Redis +# what is the execution time, in microseconds, to exceed in order for the +# command to get logged, and the other parameter is the length of the +# slow log. When a new command is logged the oldest one is removed from the +# queue of logged commands. + +# The following time is expressed in microseconds, so 1000000 is equivalent +# to one second. Note that a negative number disables the slow log, while +# a value of zero forces the logging of every command. +slowlog-log-slower-than 10000 + +# There is no limit to this length. Just be aware that it will consume memory. +# You can reclaim memory used by the slow log with SLOWLOG RESET. +slowlog-max-len 128 + +############################### ADVANCED CONFIG ############################### + +# Hashes are encoded using a memory efficient data structure when they have a +# small number of entries, and the biggest entry does not exceed a given +# threshold. These thresholds can be configured using the following directives. +hash-max-ziplist-entries 512 +hash-max-ziplist-value 64 + +# Similarly to hashes, small lists are also encoded in a special way in order +# to save a lot of space. The special representation is only used when +# you are under the following limits: +list-max-ziplist-entries 512 +list-max-ziplist-value 64 + +# Sets have a special encoding in just one case: when a set is composed +# of just strings that happens to be integers in radix 10 in the range +# of 64 bit signed integers. +# The following configuration setting sets the limit in the size of the +# set in order to use this special memory saving encoding. +set-max-intset-entries 512 + +# Similarly to hashes and lists, sorted sets are also specially encoded in +# order to save a lot of space. This encoding is only used when the length and +# elements of a sorted set are below the following limits: +zset-max-ziplist-entries 128 +zset-max-ziplist-value 64 + +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in +# order to help rehashing the main Redis hash table (the one mapping top-level +# keys to values). The hash table implementation Redis uses (see dict.c) +# performs a lazy rehashing: the more operation you run into an hash table +# that is rehashing, the more rehashing "steps" are performed, so if the +# server is idle the rehashing is never complete and some more memory is used +# by the hash table. +# +# The default is to use this millisecond 10 times every second in order to +# active rehashing the main dictionaries, freeing memory when possible. +# +# If unsure: +# use "activerehashing no" if you have hard latency requirements and it is +# not a good thing in your environment that Redis can reply form time to time +# to queries with 2 milliseconds delay. +# +# use "activerehashing yes" if you don't have such hard requirements but +# want to free memory asap when possible. +activerehashing yes + +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients +# slave -> slave clients and MONITOR clients +# pubsub -> clients subcribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled by setting them to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + +# Redis calls an internal function to perform many background tasks, like +# closing connections of clients in timeot, purging expired keys that are +# never requested, and so forth. +# +# Not all tasks are perforemd with the same frequency, but Redis checks for +# tasks to perform accordingly to the specified "hz" value. +# +# By default "hz" is set to 10. Raising the value will use more CPU when +# Redis is idle, but at the same time will make Redis more responsive when +# there are many keys expiring at the same time, and timeouts may be +# handled with more precision. +# +# The range is between 1 and 500, however a value over 100 is usually not +# a good idea. Most users should use the default of 10 and raise this up to +# 100 only in environments where very low latency is required. +hz 10 + +# When a child rewrites the AOF file, if the following option is enabled +# the file will be fsync-ed every 32 MB of data generated. This is useful +# in order to commit the file to the disk more incrementally and avoid +# big latency spikes. +aof-rewrite-incremental-fsync yes + +################################## INCLUDES ################################### + +# Include one or more other config files here. This is useful if you +# have a standard template that goes to all Redis server but also need +# to customize a few per-server settings. Include files can include +# other files, so use this wisely. +# +# include /path/to/local.conf +# include /path/to/other.conf diff --git a/msvs/setups/nuget/Redis.nuspec b/msvs/setups/nuget/Redis.nuspec new file mode 100644 index 00000000..5f79aa54 --- /dev/null +++ b/msvs/setups/nuget/Redis.nuspec @@ -0,0 +1,23 @@ + + + + redis-64 + redis-64 + 2.8.4 + Jonathan Pickett + Microsoft Open Technologies, Inc. + Redis is a very popular open-source, networked, in-memory, key-value data store known for high performance, flexibility, a rich set of data structures, and a simple straightforward API. + A production-ready Windows port of Redis, including 64-bit support, an installer for Windows Azure, Chocolatey support, and much more. + https://msopentech.com/opentech-projects/redis/ + Redis nosql cache + Copyright Microsoft Open Technologies, Inc. + https://github.com/MSOpenTech/redis/blob/2.8.4_msopen/license.txt + false + http://redis.io/images/redis.png + + + + + + +